*** I’m copying this in full here as it’s a very important read. Find the original here. Such bullying in our clay community isn’t cool. Also there is a thread on Facebook you can contribute to.
*** You can also support Page Kelly Piccolo fighting back to keep her right to use this decal technique here. Know that this doesn’t only affect Page, it affects many artists who don’t have the financial means to fight back.
“There have been a lot of things going on in the world lately, and my problems seem quite small in comparison. However, I am being faced with some troubling challenges to the functional art that I create, potentially being forced to change how I decorate my work entirely. It’s not an organic evolution, but a jarring rip from my current path.
In mid-March I did a blog post and a Periscope broadcast about the process I was taught in 2007 and have used extensively in my work in the last four years. I was contacted via email by a woman who claimed that I was infringing on her patent by describing this process and telling my viewers and readers what products I used. This is the email I received (my ellipses):
“… I am contacting you because by promoting Bel decal paper in your periscope and online you are inadvertently encouraging infringement of my patent.
# US7622237
I am sure you were unaware that there is a patent on the laser decal process and that you would not intentionally infringe.
Bel decal is no longer including these infringing instructions in with their paper packs or online.
There are several ways we can rectify this issue. If you would like you can purchase decal paper from Fired-On Images and if you choose to promote any paper at all you mention just our product. Or if you are happy buying Bel decal paper and do not want to change over you can just remove references to Bel paper online and in your teaching and instead if you are mentioning any source info just say Fired-On Images Transfer paper as the one and only source. That way you will not be infringing and all will be well.
I also have a website which we are currently updating which will include a section promoting artists the laser decal process with links to their websites and stores…which I am happy to include you in.
If you would like a free sample of our product just send you address and I’ll be happy to send a sample pack.
I look forward to hearing from you…”
As you might imagine, I was quite astonished. I couldn’t imagine anyone (especially a potter) who would patent a process that tens if not hundreds of people use. After a bit of research, I discovered that, yes, indeed, she had a patent on the process. You can read it in full here: https://www.google.com/patents/US7622237 or here: http://patft.uspto.gov/netacgi/nph-Parser?Sect1=PTO1&Sect2=HITOFF&d=PALL&p=1&u=%2Fnetahtml%2FPTO%2Fsrchnum.htm&r=1&f=G&l=50&s1=7622237.PN.&OS=PN/7622237&RS=PN/7622237
This was the 3rd email:
“Please take instructions for laser toner decals off your blog. This is the last time I will warn you. If you look at Bel’s website you will see what they are allowed to say (after we settled our suit with them) No references to using iron oxide. I am the patented inventor of this process and sell products based on this invention. The fact that you use this process in your work makes you a direct infringer. I am not an ass and would not interfere with your own ability to sell your work. My objection is to posting instructions which encourages others to infringe. I do not want to have to spend money to sue you but if you leave me no choice.. I will get my lawyer involved.
If you want you can contact Bel and ask them about this.
If you do not think I am serious check this out.
https://dockets.justia.com/docket/massachusetts/madce/1:2016cv10791/179911”
It was clear to me that this person was attempting to coerce me into buying, using, and endorsing her product. It is quite a lot more expensive, and as a working potter, I find it a better business model to keep my expenses as low as possible. It was so important to her that she not have to compete in the marketplace that she patented the process and then sued her competitor, an artist that uses decals in his work, and the American Ceramic Society (the publishers of Ceramics Monthly and Pottery Making Illustrated) to force them to use her product and compensate her for infringing on this patent. I am unaware of what settlement came about due to this suit, though I do know that the source of waterslide decal paper that I use was forced to eliminate all instructions or implication of use on ceramics from their website and product. You can read the document she filed here: https://insight.rpxcorp.com/litigation_documents/11967428?fref=gc
I hired an attorney as it became obvious that she was stalking my blog, she had followed me on Periscope and she is also a member of many ceramics community forums on social media. At the behest of my attorney, I have withdrawn my blog post outlining the process and products that I use to create my decals along with the Periscope broadcast that I had also posted to my YouTube channel.
This person claims to have invented the process, and I’m sure as you can imagine, I find this utterly untrue. You will find at the bottom of this post a list of artists and reference materials that used/described the process before she patented it. Why the defendants in the lawsuit chose to not prove or pursue a counter action, I do not know.
I am limited now in how to proceed with the imagery in my work. As my attorney put it I have four options:
-
Endorse the patent holder’s product and feel free to use “her” method on my web site;
-
Comply with the patent holder’s demands and remove the offending information (which according to her attorney not only includes the paper, but the terms related to the material, the color of the decal once fired, and the printing process);
-
Face a patent infringement case in federal court…maybe $15K minimum…her patent expires in 7 years – and then “her” method is in the public domain; or;
-
Carefully restructure your web page to include only “her” patent information. That’s public information.
As perhaps you can imagine my responses are thus:
-
Ol’ Frosty the Snowman will be skating in Hell before I endorse her;
-
Yeah, okay, if I have to….
-
I would LOVE to take this woman to court to break her patent and prove she did not invent the process, but how the heck to I come up with $15-25K??
-
This post.
I am making the assumption that I am not the only potter this person has contacted with the threat of a lawsuit to force them to buy her product so that she will “license” them to use her process. I’m not a big fan of bullies, and I hope that anyone that has been contacted by her will know that according to her patent, “(s)tandard commercially available film coated water slide decal paper” will do.
I can’t tell you what brand of paper I use, but I think you can figure out who I don’t. Instead of making a positive contribution to the ceramic community, instead of promoting her product in a positive way, showing it to be better or easier or in some way positively different from other similar products, she chooses to join ceramic communities for what appears to be the purpose of catching people in the act of infringing on her patent, even though most makers don’t even know it exists. I think this is a poor way to encourage people to use a product.
Artists/Resources
Katherine Ross, “Prophylaxis/Hygene,” 1999, http://katherineross-artist.com/section/338316-Prophylaxis-Hygiene-1999.html
Paul Scott, “Ceramics and Print, second edition,” 2002, pgs 84-111, pgs 128 & 130
Paul Andrew Wandless, “Image Transfer on Clay,” 2006, various dated works, explanation of process pgs 40-41
Clay Arts forum thread, 2003, http://www.potters.org/subject61809.htm
These are the resources I was able to come up with in less than two hours of research with a little help from my friends. They all show that the now-patented process actually existed well before she filed her patent application.The person that I learned about this process from learned it in grad school at Indiana University in 2003-2004. You will not convince me this woman invented the process in 2005. I will add more resources as I discover them.” – Page Kelly Piccolo
Sounds like all potters should boycott this person and her nasty tactics.
I looked it up and her name is Terrie Banhazl and she runs a company called Fired-On Images, which you can find at: http://fired-on.com
– contact all your local suppliers and object to them selling this product.
– write her directly and tell her that her tactics are not appreciated and will impact her business long-term if she insists on suing potters.
Yep all of these types of processes existed well before 2005, I did a studio print major in 2001 and found plenty of research info online and in print. I truly hope that common sense prevails with the legal stuff! Thanks for posting Carole…
Patent Trolling is a scourge on American business. See the wikipedia entry on Patent Trolling.
Essentially these folks make demands that they know are less than the cost of abandoning the business or fighting the lawsuit. The patent threats and follow-on licensing are a business in itself. In some cases, there is no actual business activity other than filing lawsuits.
Recent court ruling have made it a bit easier to fight back. The first ruling allows you to collect legal fees if you win. The second ruling forces them to file in your state. Up to now, this woman has been able to file in Massachusetts while she threatens people across the country. The complaints I saw were designed to obfuscate things and demanded a Jury Trial. All this is part of an effort to drive up legal costs and scare defendants into licensing her process.
IANAL, but I think the demand to cease even discussing the process is invalid and is a form of intimidation. The patent is published and is available to the public precisely so it CAN be discussed. She might be able to go after other paper manufacturers, but the fact that she is going after people that are teaching the methods is wrong and should be fought.
However, I understand when people cannot accept the risk or the costs. Especially artists. Your lawyer will tell you that even if you KNOW you are in the right, you could still lose the lawsuit and tens of thousands of dollars. And that’s entirely what they count on.
I found this post because I am trying to decide if I should buy Fired on because, unlike Bel Delcal, they say it works with all Cannon and HP b&w laser printers and I’m having a crappy time with my old HP printers that I know work with Bel Decal. Companies that carry fired on and not bel decal include the Ceramic Shop and the Big Ceramic Store among others. Are the two products essentially the same? And should these stores be made aware of the bullying by Fired on? I’m glad I found this post before I purchased!
As long as your printer uses Iron Oxide, it will work. I ought to sue this lady as I was doing laser decals long before she ever thought about a patent and my Chinese and Australian students can testify (Aus-1995). And i have been printing my own decals since 1973 and thus she is infringing on my right to create the art I have made for decades. If Victor Spinski were alive still he too would join to fight this fool of a business person.
Aaaaahhh. Capitalism at it’s finest. My guess is that her pots are mediocre at best. #sorrynotsorry
She’s not even a potter. She is a greedy leech.
Hasn’t her patent expired? According to the records she was granted the patent in 2009, which means it would expire in 2016, right?
Utility patents last 20 years from the first filing date, IIRC.
I wrote an article for POTTERY MAKING ILLUSTRATED I think in 1985. On how to make your own decals using Bel Paper. The magazine was sued and asked me to show usage years prior to her patent which I did using old CLAYART online discussions which you can still access. I also showed that I took a decal making workshop at Peters Valley in Jersey and the process was well known. About a year or so ago PMI was fighting the suit but I never heard what the result was. I still have a bunch of Bel paper.
I could care less and not give a rats ass about fired on ceramics but some how this infringement issue affects Bel Decal Paper in general for scale model building and model after market markings as their laser papers is not longer available and it seams that Bel Decal has left the interwebs and taken a lot of Laser printer compatible decal paper off the market with little prospect of replacing that void in the decal paper suppliers.